Results 1 to 7 of 7
Thread: Bad First Layers On My Prints
Threaded View
-
05-09-2022, 12:25 AM #7
- Join Date
- May 2022
- Posts
- 6
If your print surface is dirty and greasy, your freshly-tuned first layer settings won't do much. The first layer will most likely fail to adhere, and your print will fail. I had serviced my printer to avoid this issue.
BambuX1Carbon($2k) vs MarkTwo($20k)
05-31-2024, 12:45 PM in 3D Printers (Hardware)