Results 1 to 3 of 3
-
12-20-2021, 12:16 PM #1
- Join Date
- Dec 2021
- Posts
- 1
Extruder failing to heat above 25 degrees C
Using the Adventurer 3 Lite, the filament was stuck in the piping. Removed the extruder and pulled the filament through. Clicked the extruder back into place (made sure was clicked in) but now it won't heat past 25 degrees. I've done: factory resets, calibrations, turned off the machine, taken out the extruder and re-insterted it. I'm at a loss for what else to do. I've had this thing running possibly 68 hours in total, please help!
-
12-21-2021, 12:54 PM #2
contact flashforge - sounds like the thermistor has died.
-
01-31-2022, 11:45 PM #3
- Join Date
- Jan 2022
- Posts
- 1
Nice to see this post here and thanks for sharing this with us. Looking for the latest updates about technology. Here you can get complete details about this. https://techlops.com
New member with print issue
06-11-2024, 08:57 AM in Tips, Tricks and Tech Help