Results 1 to 5 of 5
Threaded View
-
05-18-2014, 07:28 AM #2
I'll only comment on the power supplies.
If the power supply from the computer is an ATX one, go for that. You want amps at 12V.
Old Man Emu
I'll only comment on the power supplies.
If the power supply from the computer is an ATX one, go for that. You want amps at 12V.
Old Man Emu
Holes and pockmarks in print walls
06-04-2024, 09:14 AM in General 3D Printing Discussion