Results 1 to 2 of 2
Threaded View
-
04-20-2021, 06:59 AM #2
- Join Date
- Aug 2020
- Location
- United Kingdom
- Posts
- 249
You have zero of very low adhesion to the print bed. Try setting the print head closer to the bed about 0.1 mm or 3 thou (0.003") And / Or use a bed adhesive like a thin layer of PVA glue stick Elmer or Prit depending on which side of the pond you are.
BambuX1Carbon($2k) vs MarkTwo($20k)
05-31-2024, 12:45 PM in 3D Printers (Hardware)