Results 1 to 10 of 12
Thread: End of STL files?
Threaded View
-
05-11-2014, 10:31 AM #8
One thing the Slicer programs could do is slice a couple of layers and start sending that G-Code to the printer. The printing takes enough time it would seem the Slicer could be doing that in parallel.
And on the G-Code topic... It should be straight forward to convert G-Code back to an .STL format.
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion