Results 1 to 5 of 5
Thread: Help troubleshooting
Threaded View
-
03-13-2021, 09:35 AM #2
I printed CE3PRO_cableChain_link_v3.gcode and there is nothing wrong with your sliced G-code.
Therefore it must be have something to do with filament extrusion, clogged extruder, stepper missteps or filament.
What filament are you 3D Printing?
I see that the extruder temp is 220C with bed temp of 50C layer height .2mm
New to 3d printing looking for...
05-20-2024, 12:56 AM in Tips, Tricks and Tech Help