Results 1 to 5 of 5
Thread: My First Project
-
05-08-2014, 01:35 PM #1
- Join Date
- May 2014
- Location
- San Francisco, CA
- Posts
- 29
My First Project
I wanted to share with you the results of my first 3D printing experience. The red Eiffel Tower was my first attempt at using this technology. (I know, I am behind). It is 9.5 inches tall and it took me about 7 hours to print using the Titan 1. I printed a smaller version too, which is also featured below. I was shocked by the detail on the smaller model.
IMG_1509.JPG
IMG_1513.jpg
Any suggestions for what I should try to print next?Last edited by Roberta3D; 05-08-2014 at 01:43 PM.
-
05-08-2014, 02:11 PM #2
- Join Date
- Oct 2013
- Posts
- 67
Very nice detail. Which printer did you use? Do you have any larger photos?
-
05-08-2014, 02:40 PM #3
- Join Date
- May 2014
- Location
- San Francisco, CA
- Posts
- 29
DSC05353.jpg
Here is a bigger pic. I am new to this, so bear with me while I figure out how to scale my photos.
-
05-08-2014, 02:44 PM #4
- Join Date
- May 2014
- Location
- San Francisco, CA
- Posts
- 29
DSC05355-1.JPG
It looks like it worked! Here is a close up!
DSC05252-1.JPG
Here is an artsy picture of it.
I used the Titan 1 by Kudo3D. It hasn't been officially released yet, not until May 20th, but I was fortunate enough to procure a prototype.
-
05-08-2014, 05:20 PM #5
OK. You have your 3D printer and you can see that it works. But it is just a tool to be used to express yourself. Use your imagination. What things are you interested in? Design and print those. Try not to be a mindless replicator of other people's designs. (But sometimes you have to for the sake of time and convenience)
Old Man Emu
Ender 3v2 poor printing quality
10-28-2024, 09:08 AM in Tips, Tricks and Tech Help