Results 1 to 8 of 8
Threaded View
-
10-21-2020, 03:28 AM #3
- Join Date
- Oct 2020
- Location
- HEMEL HEMPSTEAD,, UK
- Posts
- 4
Weird Printing on Prusa MK3 clone
Hi
Many thanks for coming back.
I have 1629.84 set and the object seems to print the correct height. It doesn't bind anywhere up the z axis or wobble.
I spent some time upgrading to the latest Marlin Bugfix 2.0 yesterday to no effect. I even changed PSU to a spare 24v 360W.
Tried printing in 0.3 and 0.2mm, the 0.2mm has ridges at around 3mm spacing except for the top.
For Reference I am using Mattercontrol, PLA
I am next going to try printing from another app and slicer and try and see if it is the firmware.
DSCN0049.jpg
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion