Results 1 to 2 of 2
Thread: Generating Lattice Supports
Threaded View
-
09-06-2020, 03:00 PM #2
- Join Date
- Jun 2014
- Posts
- 887
Meshmixer, free, multi-platform will generate tree-like supports on STL files imported to the program. Once created, you can export the entire model or only the supports.
The model below is designed to be printed flat-side down, but I rotated it to use as an example here. In the Analysis, Overhangs selection, there are many parameters to change. The default settings turned the model into an unworkable mass/mess, but once some of the dimensions were reduced, it became less massy/messy.
Printer will print perfect...
06-14-2024, 10:44 AM in Tips, Tricks and Tech Help