Results 1 to 3 of 3
Threaded View
-
04-30-2014, 04:51 AM #3
- Join Date
- Apr 2014
- Location
- Netherlands
- Posts
- 76
Hi eveninggown, I got a delta printer so a Bowden Extruder is the only way to go really, you don't want the extruder motor on the hot-end carriage.
But it's also more tricky to get the pressure right because the filament has to be pushed through the tubing, I used a few solutions before I decided to build my own.
You are welcome to try it out yourself Kis Bowden Extruder
New to 3d printing looking for...
05-20-2024, 12:56 AM in Tips, Tricks and Tech Help