Results 1 to 4 of 4
-
05-29-2014, 07:05 AM #1
- Join Date
- May 2014
- Posts
- 11
Freaken Crazy 3D Printed GUN - Halo Magnum
OK, calm down. No this isn't a working gun. It's just a scan and print. I just had to share this though because of all great it turned out. Note: this isn't mine. It was done by a man named Andrew Bougie on a 3dsystems 660pro 3d printer. It is a Halo Magnum, and it looks freaken amazing.
For those wondering, this is what the real gun looks like:
Pretty amazing right? That's what a 3D printer in the $100,000's can do.
-
05-29-2014, 09:01 AM #2
- Join Date
- Sep 2013
- Location
- New Jersey, USA
- Posts
- 494
He used a pretty expensive 3D Systems 660Pro 3D printer for this creation. In the game of Halo, this is actually a M6C Personal Defense Weapon. It's pretty impressive, but remember this was done on a very expensive machine. here are the details of the 3D printed which was used by Bougie for this gun: http://www.3dsystems.com/3d-printers.../projet-660pro
-
05-30-2014, 06:40 AM #3
I've seen very comparable versions printed on FDM printers., there is a tonne on thingiverse, probably not as polished as this one but for a home job on an FDM printer they look pretty good .
Last edited by Geoff; 05-31-2014 at 09:01 PM.
Hex3D - 3D Printing and Design http://www.hex3d.com
-
06-28-2020, 03:30 AM #4
- Join Date
- Jun 2020
- Location
- New York
- Posts
- 9
Supercool model. I love it)
Ender 3v2 poor printing quality
10-28-2024, 09:08 AM in Tips, Tricks and Tech Help