Results 1 to 4 of 4
Threaded View
-
04-25-2020, 07:42 AM #2
- Join Date
- Apr 2020
- Posts
- 31
If I understand the problem correctly, you want to basically disable/block the valve on the 3M #8511 type masks that you have access to, correct? The idea is to make it function like the 3M #8510/8210?
If so I suggest two options:
1. You could apply glue using a hot glue gun in/around the valve to keep air from moving through it.
2. You could print a simple cap that goes over the valve and glue it in place for the same effect.
Printer will print perfect...
06-14-2024, 10:44 AM in Tips, Tricks and Tech Help