Close



Results 1 to 10 of 10
  1. #1

    Printing anti-droplet face shields.

    Hi.
    This is my first post, and if it's in the wrong place, I apologise. My name is Phil, and I am in Thanet in Kent, UK. I have recently started printing PPE face shields, which I am giving out free to key workers in my area. Several fellow printers have joined in, and we are currently turning out around 80 a day. We are overwhelmed by demand for them, so I started a crowdfunding page in order to keep supplies of filament and acetate sheets coming in, as I only have limited resources, being self employed and no longer working due to this pandemic. This is just a shout out for anyone who can help. Whether it be printing some headbands, making the complete shield, or just contributing to the fund. I currently have 3 printers running and have raised enough for a fourth.

    Please visit my facebook page, take whatever inspiration you can, and join in. There are key workers (not just nurses and doctors) in their thousands out there keeping us fed and cared for, so please lets get 3d printing and keep them safe.

    Many thanks.

    https://www.facebook.com/Free-Face-S...1029748229943/

  2. #2
    Super Moderator curious aardvark's Avatar
    Join Date
    Jul 2014
    Posts
    8,801
    admirable project and applicable to everyone at the moment.
    Also this actually makes a lot more sense than printing masks that need replaceable filters and aren't easily sterilised.
    I'll sticky this for the duration.

    what size print bed do you need ?

  3. #3
    Super Moderator curious aardvark's Avatar
    Join Date
    Jul 2014
    Posts
    8,801
    here's another design from prusa.
    https://www.prusa3d.com/covid19/

  4. #4
    Super Moderator curious aardvark's Avatar
    Join Date
    Jul 2014
    Posts
    8,801
    here's another design from prusa.
    Also has alist of different organisations by country you can join and help supply face shields to. Getting the acetate is probably going to be the biggest problem.
    https://www.prusa3d.com/covid19/

  5. #5
    Im in the same boat here, we live in a small town and need to do masks and faceplates

  6. #6
    Super Moderator JohnA136's Avatar
    Join Date
    Oct 2013
    Location
    Jersey Shore
    Posts
    551

    Prusa Mask

    Making Prusa Face Masks for my First Aid Squad. I get the Acetate from Staples. It is a cheap Presentation Folder and I just cut off the clear first sheet.
    Attached Images Attached Images

  7. #7
    Super Moderator curious aardvark's Avatar
    Join Date
    Jul 2014
    Posts
    8,801
    well I'm currently looking for a design I can print in a 150x220 area.
    150x150 would be better (I could run them off on the delta then. A 200mm circle sounds good, till you need to print squarish stuff :-), so far smallest I've found is 180x160.

  8. #8
    Super Moderator JohnA136's Avatar
    Join Date
    Oct 2013
    Location
    Jersey Shore
    Posts
    551
    I have been printing the Prusa on our Rostock Max v2.
    60807723782__2A778148-3BFB-4173-B835-9A674BD0B801.jpg

  9. #9
    Student
    Join Date
    Jun 2020
    Location
    United states
    Posts
    10
    Thanks for sharing it is very useful one in this pandemic situation

  10. #10
    Quite helpful for my own personal projects. Hope you all succeed!

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •