Results 1 to 10 of 10
Hybrid View
-
04-02-2020, 11:03 AM #1
- Join Date
- Jan 2020
- Location
- Bel Air Md
- Posts
- 181
After measuring the 4 cubes and all pretty close, I cleaned bed with acetone , the did the computer paper to dial in hot end nozzel distance. Also applied stick glue. Ane cell case is started and sticking
-
04-03-2020, 08:44 AM #2
- Join Date
- Jan 2020
- Location
- Bel Air Md
- Posts
- 181
shi.......... still had warping so in cura I turned case 90degrees so it print across the bed as opposed front to back. before told to print, i cleaned bed, applied stick glue after print done still not happy with
Qidi X Plus 3 Paper thin first...
Yesterday, 01:15 AM in General 3D Printing Discussion