Results 1 to 9 of 9
Thread: Help please with 1.1.9
Threaded View
-
01-18-2020, 11:19 PM #9
- Join Date
- Dec 2019
- Posts
- 10
Dude, you are awesome. That .3 at startup is due to the layer height. I have a starting layer height of .3, that's why it does that. Thanks for that. I'm about to try your g code now, still not sure why the offsets wont move the nozzle down.
Holes and pockmarks in print walls
06-04-2024, 09:14 AM in General 3D Printing Discussion