Results 1 to 9 of 9
Thread: Help please with 1.1.9
Threaded View
-
01-17-2020, 03:55 PM #6
- Join Date
- Dec 2019
- Posts
- 10
Oh yeah and another thing I noticed when playing with the offsets in Marlin. When I put a -1.00 Z offset in the firmware and re upload, when it homes and stops the lcd and M114 in Cura both read this as 1.00. Then when I change it to 1.00 in the firmware, re upload and home Z again, it will then show -1.00 on both the lcd and M114 again. So that seems backwards? And as stated before, actual nozzle height remains the same
New member with print issue
06-11-2024, 08:57 AM in Tips, Tricks and Tech Help