Results 1 to 6 of 6
Thread: Pla not sticking to HBP!
Threaded View
-
04-23-2014, 12:57 AM #6
- Join Date
- Apr 2014
- Posts
- 5
I run mine at 110-115-120 (120 for my red which i also have to extrude at 240) for ABS and 50-70 for PLA.
I run mine at 110-115-120 (120 for my red which i also have to extrude at 240) for ABS and 50-70 for PLA.
Holes and pockmarks in print walls
Yesterday, 09:14 AM in General 3D Printing Discussion