Results 1 to 10 of 10
Thread: How do I turn on the LED lights?
-
04-20-2014, 02:32 PM #1
- Join Date
- Apr 2014
- Posts
- 10
How do I turn on the LED lights?
I have tried to go into the control panel in ReplicatorG and changing the LED color but still that does not turn on any leds for me. I'm at a complete loss here.
-
04-20-2014, 06:37 PM #2
There is an option in the LCD screen for lights on or off and color. Not sure about RepG. I rarely have my computer connected directly to the printer and have been using makerware.
-
04-20-2014, 06:41 PM #3
- Join Date
- Apr 2014
- Posts
- 10
I have looked all over and I can't find it. Can you tell me the specific path that I need to take to get to the color menu?
-
04-20-2014, 08:18 PM #4
Is it for the creator x? I will look later, I don't have the machine in front of me right now. It is in one of the utility or options pages. If you scroll through all of them it should show up.
-
04-20-2014, 09:30 PM #5
-
04-20-2014, 09:42 PM #6
- Join Date
- Apr 2014
- Posts
- 10
-
04-20-2014, 10:35 PM #7
Under "Info and Settings" go to General settings. The lights should be on by default, they were on mine anyway.
-
04-20-2014, 11:23 PM #8
- Join Date
- Apr 2014
- Posts
- 10
I don't see an option like that for mine. I updated the firmware if that matters.
https://cloud.mail.ru/public/48312ae617d8/IMG_3581.JPG
Here is what I see under the general options.
https://cloud.mail.ru/public/4700cce1ec18/IMG_3578.JPG
https://cloud.mail.ru/public/ba5a7df759bb/IMG_3579.JPG
https://cloud.mail.ru/public/92b6f5ac5302/IMG_3580.JPG
What firmware are you on and how can I downgrade?
-
04-21-2014, 12:17 AM #9
Cant help ya there. I'm just using whatever came on the Creator X for now. I read some about Sailfish, but nothing that wows me into switching.
-
04-22-2014, 09:15 PM #10
- Join Date
- Apr 2014
- Posts
- 10
Does anyone know how I can downgrade from sailfish to the default firmware so I can use the LEDs?
Ender 3v2 poor printing quality
10-28-2024, 09:08 AM in Tips, Tricks and Tech Help