Results 1 to 4 of 4
Threaded View
-
09-24-2019, 11:37 AM #3
- Join Date
- Sep 2019
- Posts
- 3
A little more research shows that the support head runs at 250 C and the model material head runs at 280 C. Two sources indicated that HIPS works better than the original Stratasys material although it is rated at 230 C. I have some HIPS on the way from Push Plastic. Based on the feedback from other SST owners I am optimistic.
Thanks
Holes and pockmarks in print walls
Yesterday, 09:14 AM in General 3D Printing Discussion