Results 1 to 10 of 25
Threaded View
-
04-17-2014, 05:02 PM #23
Ah, marinated ABS. Let me get my fork and knife out and tie my 3d printed bib around my neck....
Yes, I figured it might not go too well but you don't know until you test it. That's the whole tenant of science.
Great test. It's good to see a good photo of what severe "out-gassing" looks like. If for nothing else, the test gives us a good image of that so when it happens we'll know.
I'm a little confused about what you are saying about the same filament at 55% and 90% humidity. What are you doing there?
What I need to do (and I will when I get some time) is leave a piece of filament out for 1-day, 1-week and 1-month and then print the same object against fresh and humidity-free filament. Then examine them closely and see if I can tell which is which. In a perfect world, you would not be able to. That test will take some time as I'd need to take the "month" piece out now and then wait 3-weeks to take out the next piece....etc. I will do this one day soon.
Explain the next step was confusing and report back with the results. Nice work...Bambu P1S/AMS
NVision4D http://nvision4d.com
Printer will print perfect...
06-14-2024, 10:44 AM in Tips, Tricks and Tech Help