Results 11 to 11 of 11
-
04-12-2014, 06:09 AM #11
- Join Date
- Feb 2014
- Posts
- 18
Figured out that my power supply was too weak. It was forcing me to have to turn the current to high to get it to extrude
thanks for the help everyone.
Figured out that my power supply was too weak. It was forcing me to have to turn the current to high to get it to extrude
thanks for the help everyone.
New to 3d printing looking for...
05-20-2024, 12:56 AM in Tips, Tricks and Tech Help