Results 1 to 7 of 7
Thread: Creality Ender-3 slanted Nozzle
-
11-08-2018, 06:50 AM #1
- Join Date
- Nov 2018
- Posts
- 4
Creality Ender-3 slanted Nozzle
Hi guys, new member here.
I?ve just received my first 3D printer, the Creality Ender-3 and
while assembling the unit I noticed that the nozzle is slanted
and not vertical on its holder unit.
Is this normal or do I have to try to make it vertical?
Did I receive a faulty nozzle unit?
Thank you.
-
11-11-2018, 11:45 AM #2
that sucks.
And yes it really does need to be vertical.
-
11-11-2018, 01:49 PM #3
- Join Date
- Nov 2018
- Posts
- 4
I've contacted GearBest and after a lot of persuasion.. they agreed to send me
a replacement nozzle with heater block.
I haven't tried the printer yet, but is there a particular signature on the prints
that suggests a tilted nozzle ?
Thanks!
-
11-12-2018, 06:21 AM #4
lol your's is the first (non-deliberate) tilted nozzle I've ever seen.
Probably just general printing issues.
Who knows, might actually work. have a go :-)
-
11-12-2018, 11:00 AM #5
- Join Date
- Nov 2018
- Posts
- 4
Indeed... :-)
This must be a first because I could not find anyone else with a similar problem.
Here is my first 3D print with the sample included filament :
My 1st 3D Print.jpg
-
11-14-2018, 06:24 AM #6
that dice is petty impressive.
Can't see any obvious issues.
if that's with the tilted nozzle. I - personally - would leave it as it is :-)
-
11-14-2018, 07:06 AM #7
- Join Date
- Nov 2018
- Posts
- 4
Yes, its with the tilted nozzle!
Maybe all the nozzles should be slightly tilted..
I will leave it as it is. Thanks.
Design not printing solid
09-17-2024, 06:12 AM in 3D Modeling, Design, Scanners