Results 1 to 10 of 18
Thread: SSR keeps melting.
Threaded View
-
07-07-2018, 04:46 AM #4
- Join Date
- Jun 2014
- Posts
- 886
If it's melting on the power supply side, that's the supply side, not the load side as stated in your first post. Important distinction!
Are you using crimp type connectors on those wires, or are the wires wrapped around the terminal screws or under the terminal clamp plates?
A photo of the damaged device would be helpful.
Printer will print perfect...
Yesterday, 10:44 AM in Tips, Tricks and Tech Help