Results 1 to 3 of 3
Thread: Hanging threads on verticals
Threaded View
-
05-06-2018, 10:12 PM #1
- Join Date
- Mar 2018
- Location
- Murphy, Mo
- Posts
- 10
Hanging threads on verticals
Printing half of a stand to hold RC cars. I have printed the same file before with out issues but with a different filament, didn't have the issue. As you can see on the uprights there's strings hanging off. This is the 1st time I have seen this, had the fine hair like strands at times but nothing like this.
Printer: Wanhao Duplicator i3 Plus
Filament: Dazzle Light PLA
Temp: 210
Bed temp 60
Speed 60
Slicer Cura 3.04
To me it looks like it's travelling while still extruding if so what could be causing this?
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion