Results 1 to 8 of 8
Threaded View
-
02-08-2018, 01:55 PM #7
- Join Date
- Feb 2018
- Posts
- 11
well, that didn't do it. cura doesn't have an adjustment for the offset, i couldn't find how to do it in the gcode, so i re-leveled the bed with a little bit bigger gap, a thicker piece of paper. that thicker piece was more like two pieces of paper that i used before to level the bed. i still got the gills. i'm trying a different type of top/bottom layer pattern right now, also lowered the bed temp down to 60 where i have had 4 or 5 successful prints including one wide one, 280mm wide, but it was narrow in the x direction.
Printer will print perfect...
06-14-2024, 10:44 AM in Tips, Tricks and Tech Help