Results 1 to 5 of 5
Thread: Can someone print me some parts?
-
01-28-2018, 01:01 PM #1
- Join Date
- Jan 2018
- Location
- West Midlands, UK
- Posts
- 2
Can someone print me some parts?
Hello,
Is anyone able to print me some parts for my Prusa i3? I have the STL files and am obviously willing to pay. Just struggling to know where to start in terms of sourcing the parts I need. I've looked on eBay but I do not need a full set, only a few pieces.
I'm located in the UK.
Any help welcome!
Thanks,
James
-
01-28-2018, 02:01 PM #2
- Join Date
- Jun 2014
- Posts
- 885
If you were in the US, I'd happily assist you. Our local library has a Prusa i3 MK2.5 and it's a great machine. You may be able to find a local makerspace with members willing to assist you for a reasonable cost. Consider to use a search engine for "makerspace (my location)" to find someone close.
-
01-28-2018, 07:25 PM #3
My suggestion would be to buy a Folger Tech i3-2020 kit. I have one of those printers and I love it. It is one of the best 3D Printer kits for the money.
And... I'm so impressed with it, I added a configuration example file for it in the main Marlin branch.
https://github.com/MarlinFirmware/Ma...onfiguration.h
Incidentally... This machine was used for the original UBL development for Marlin. And of course... This printer is shipped with (an outdated) version of Marlin.Last edited by Roxy; 01-28-2018 at 10:14 PM.
-
01-29-2018, 10:21 AM #4
not a problem - I'm in the uk.
where abouts are you ? I'm pretty much exactly in the middle of england :-)
Got a list of the bits you need ?
-
01-29-2018, 12:22 PM #5
- Join Date
- Jan 2018
- Location
- West Midlands, UK
- Posts
- 2
Life saver - thank you!
I'm about 10mins from Stratford Upon Avon in the Midlands.
Here are the printed parts I'm after (I have the STL files and can send them over)
- X end motor
- X end idler
- X carriage
- Z axis top (left & right)
- Z axis bottom (left & right)
- E3d extruder assembly
Would you recommend them be printed in ABS or PLA?
How much would you want for the above inc delivery?
Thanks again,
James
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion