Results 1 to 2 of 2
Thread: Anycubic Kossel not powering on
Threaded View
-
01-01-2018, 10:59 PM #2
- Join Date
- Dec 2017
- Posts
- 2
Update: I used a multimeter to test the voltage output of the PSU's wires, and they are all coming back with over 12 volts of output. In addition, I double-checked the continuity of the fuse and everything is also good to go there. I would think this means that the PSU is all good, and there may be another issue somewhere within the mainboard.
Holes and pockmarks in print walls
06-04-2024, 09:14 AM in General 3D Printing Discussion