Results 1 to 7 of 7
Threaded View
-
12-11-2017, 12:33 PM #6
- Join Date
- Dec 2017
- Posts
- 4
I did measure the Vref fort the A4988 made by Geeetech. The Vref must be within 0.8V-1.2V. In my case the Vref was 0.9V on all 4 stepper controllers. I did raise the voltage to 1V and try to print something someday this week.
BambuX1Carbon($2k) vs MarkTwo($20k)
05-31-2024, 12:45 PM in 3D Printers (Hardware)