Results 1 to 3 of 3
Threaded View
-
12-02-2017, 12:11 PM #3
- Join Date
- Jan 2016
- Posts
- 326
And a bracket that moves the filament guide tubes away from the rear wall of the enclosure. You may or may not need a bracket for the cable coming from the bottom of the enclosure and going into the top of the extruders. Both brackets can be found on Thingverse website.
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion