Be thankful you don't live in canada - parcels to my sister go missing regularly.

So this is my first ear-ring.
small-acornearring_250x480.jpg


Came out quite well. Added a capture slot to my acorn model and went as small as openscad would let me.
And also got me back to thinking about copper plating.
It's got a built in hanger and conductive connection to the acorn.
Should work pretty well.

Also going to try a little varnish on the acorn cup.

One of these days I'll have to try the 0.2mm nozzle and see just how fine the detail can get.
But on the whole quite pleased with this.