Results 1 to 10 of 17
Thread: Model to big-need to split it
Threaded View
-
08-11-2017, 10:58 AM #6
- Join Date
- Jun 2014
- Posts
- 885
I suspect that it's not 43 mm, as the commercial resources mentioned earlier would not have rejected it as too big. If it's 43 inches, there might be a scaling problem with the originating software.
According to Siri, it's about 25 mph for a European swallow, so you're close.
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion