Results 1 to 10 of 474
Threaded View
-
07-24-2017, 04:08 PM #11
huh, just like that :-)
The .32 is a little worse than the 0.2 So
we'll stick with 0.16 - found the copper filament - both samples :-)
this should be good :-)
And also prints on a cold bed.
Umm, but probably better with heated bed lolLast edited by curious aardvark; 07-24-2017 at 04:17 PM.
Holes and pockmarks in print walls
06-04-2024, 09:14 AM in General 3D Printing Discussion