Results 1 to 10 of 474
Threaded View
-
07-16-2017, 10:57 AM #11
yeah I was thinking that. Plus proved that you don't need to print it on silly resolution settings.
Just unticked: 'only retract on travel'. Should get rid of a lot of the thicker stringing.
Under tools, options, machines. the y axis box is ticked for flip table axis.
There are four combinations of this as you can have it on and off both from the tool/options/machine AND from the gcode page in the printer profile.
I have tried all four combinations - and none of them worked.
When i first got simplify 3d what i saw on the preview screen was what printed. Then when I upgraded to version 3, the text on the screen showed mirror reversed but the text printed normally. So that wasn't an issue.
But with the delta, it doesn't matter whether the preview shows normal or reversed text it just prints reversed.
I've got a vague feeling that playing with the 'x' axis inversion is what sorted the printed text.
No cases yet so I'll have another play with the settings.Last edited by curious aardvark; 07-16-2017 at 11:06 AM.
New to 3d printing looking for...
05-20-2024, 12:56 AM in Tips, Tricks and Tech Help