Heaven help me - I've just bought a delta kit :-)

[curious aardvark]

nope, what actually happened was that she stopped about an inch or so into the job.
No jams, not a power cut, just stopped. All settings were fine when i went in yesterday morning, still heated, just waiting for the next instruction.

I have been using the dirt cheap sd card that came with the printer. So presuming somewhere in the 1.68million lines of gcode, it got corrupted.
Got a few brand new 4gb sd-cards lying around, I'll try again tonight with a new card.

And the marble run will definitely print at 0.3 layer height. The bit that was done was at 0.25. No issues at all bar some stringing. So a furtle with the retraction settings, drop speed down to 120 and up layer thickness to 0.3.
It'll probably need some blowtorching - to kill the cobwebs :-)

Might have a go at painting a helmet to day.
Though if my cases arrive, I have got a couple of base units to build for actual paying customers.

Time lapse wise - remembered I got a better webcam with the ciclops 'scanner' (yeah right) so I'll dig that out of the box and find somewhere permament to attach it. Also need to source the professional version of the software.