Results 1 to 5 of 5
Threaded View
-
07-13-2017, 10:08 AM #3
- Join Date
- May 2017
- Posts
- 12
Hi
Sorry for the late reply.
I found the arms.... http://www.thingiverse.com/thing:790066
I have attached an image showing how out of "true" the arms are - strangely enough though, when both plastic arms are placed beside eachother, they are both warped (out of 90 degrees) by the same amount!
DJB_9186222.jpg
Having stripped the build plate down, the construction is really naff - I am thinking about making a few changes to pull it all together. These captive nuts in the plywood dont help either.
I would almost put money on the fact that all CTC's are going to be like this too.
I should stop being a cheapskate and buy all aluminium replacements!
Holes and pockmarks in print walls
Today, 09:14 AM in General 3D Printing Discussion