Results 1 to 10 of 32
Threaded View
-
06-30-2017, 12:19 AM #22
- Join Date
- Jul 2016
- Posts
- 43
Ok well it seems switching to the lead screws vs threaded rods has caused an issue. The printed parts I made look like they may be too far away from the X-carriage. This makes it bend the rods away when it's getting close to Z=0. Then it just gets stuck. Dang it!
Printer will print perfect...
06-14-2024, 10:44 AM in Tips, Tricks and Tech Help