Results 1 to 3 of 3
Thread: Wood Filament Settings
-
06-20-2017, 05:06 PM #1
- Join Date
- Jun 2017
- Posts
- 9
Wood Filament Settings
I own a Monoprice Maker Select V2 and I recently bought MGChemicals Wood PLA Filament as well as a high-lubricity .6mm nozzle.
What settings should I use for the wood filament?
-
06-21-2017, 05:42 AM #2
usually it's just standard pla settings as the wood fibres are mixed with pla.
Should give you temps on the reel.
-
06-24-2017, 11:24 AM #3
- Join Date
- Jun 2017
- Posts
- 1
I use for the wood
http://www.travelstop.org
Holes and pockmarks in print walls
06-04-2024, 09:14 AM in General 3D Printing Discussion