My first time trying to post pics here and I'm not seeing a way to add text to the post...

Since you asked, CA, here's pics of the original firehouse that is the first building I modeled, the Blender model, and two pics of the print. The building is printed in 6 pieces - the walls, two roof pieces, the tower, the tower peak and the chimney. It's blue ABS - blue because that's the color that came with my machine. Roughly 5 hour print time for the walls.

So far I've had two issues with Simplify. First, with the roof pieces, the preview made it look like the shingles were all going to print as hollow outlines - but they printed fine. Secondly, when I tried to manually add supports to the tower (which was printed upside down), it wouldn't let me. I did get some sag in those bridged areas and had to trim them with a razor. Still don't know what the problem was with those supports.

My camera isn't too good at macros, but I hope you can see enough detail to know what I got.

Thanks for your interest, CA - I hope you guys will let me know what you think.