Quote Originally Posted by write2dgray View Post
I would like to print some abrasive filaments SteelFill and CF PETG. What would you guys recommend - is there a suitable nozzle swap or should I look at an all metal hotend?

Here are two options I was considering:
Steel Nozzle:
https://www.p3-d.com/collections/dur...truder-nozzles

All Metal Hotend:
https://www.amazon.com/Hotend-Nozzle.../dp/B01C3HEQZC
If you end up taking the hot end approach, you might check out jfkansas site. He makes some kits that might help with that changeover. I think there are some size differences that need to be considered if you are on a QiDi Tech printer. The web site for his store is http://store.wmdproducts.com/