Results 1 to 4 of 4
-
02-28-2017, 01:10 PM #1
- Join Date
- Feb 2017
- Location
- Las Vegas
- Posts
- 3
New printer.... Do i need to flasH it???
Hello All
Just got my 1st. 3d printer last night, put it together in about 6 hours. Turned it on ..... nothing moves nor heats up...... double checked wiring.... just wondering if the new mother board needs to be flashes?
here is a link to the printer i got: https://www.3dprintersonlinestore.com/product/personal/creatbot-tech-prusa-i3-kit
open video in new tab to viewLast edited by Wildbill7459; 02-28-2017 at 01:18 PM.
-
03-01-2017, 11:30 PM #2
- Join Date
- Feb 2017
- Location
- Las Vegas
- Posts
- 3
ok got it fixed..... just a loose connection
-
04-01-2017, 03:16 PM #3
- Join Date
- Mar 2017
- Posts
- 7
-
04-02-2017, 04:33 PM #4
I was going to say, usually you have to ask the printer ahead of time if it likes to be flashed, some just aren't into that type of thing.
BambuX1Carbon($2k) vs MarkTwo($20k)
05-31-2024, 12:45 PM in 3D Printers (Hardware)