Results 1 to 2 of 2
Threaded View
-
03-31-2017, 10:25 AM #2
The filament pathway is sized for one or the other filament diameter depending on the extruder body .stl version you printed. so the extruder body can't do 2 different diameters as designed. it might be possible to drill out a 3mm diameter extruder body to 4mm and insert a liner, but it's tricky because the filament path is curved. I think the flex version has a straight filament path so that's a possibility.
The hotends are interchangeable, just need to be set up to the same length and level out the X-Carriage.
New to 3d printing looking for...
05-20-2024, 12:56 AM in Tips, Tricks and Tech Help