Results 1 to 6 of 6
Threaded View
-
03-02-2017, 01:55 PM #6
- Join Date
- Apr 2016
- Posts
- 28
Yes I found the fix....
In S3D you need to print a Skirt/Brim at 0 mm offet from the part, 2 or 3 outlines along with the Oozeshield.
This provded a good base for te oozeshield to start with and clears both nozzels.
Workswell now.
see my voideo
https://www.youtube.com/watch?v=ZCUewayYo2g
Qidi X Plus 3 Paper thin first...
Yesterday, 01:15 AM in General 3D Printing Discussion