Results 1 to 10 of 29
Threaded View
-
01-28-2017, 01:29 PM #9
Ya an all metal setup can flow more plastic, bigger/longer melt zone. More direct heat to the nozzle since no PTFE to insulate. I run my multiplier at about .86.
Ya an all metal setup can flow more plastic, bigger/longer melt zone. More direct heat to the nozzle since no PTFE to insulate. I run my multiplier at about .86.
New to 3d printing looking for...
05-20-2024, 12:56 AM in Tips, Tricks and Tech Help