Results 1 to 10 of 10
Thread: Printer start position
Threaded View
-
01-23-2017, 02:31 PM #7
- Join Date
- Apr 2016
- Posts
- 120
The idea with the line is to purge and prime the print head.
If after this command, the print is starting in the wrong place, it sounds like a the following on code to set the print head to the correct position is missing or incorrect.
Sorry, I am not familiar with the software, so cannot really advise where to look any further.
Holes and pockmarks in print walls
Today, 09:14 AM in General 3D Printing Discussion