Results 1 to 6 of 6
Threaded View
-
01-18-2017, 01:57 PM #5
- Join Date
- Jan 2017
- Posts
- 12
did this ever get solved? I have same problem and when i start to print, it raises Z axis by 0.3 (reading on lcd)
Any ideas or clues?
did this ever get solved? I have same problem and when i start to print, it raises Z axis by 0.3 (reading on lcd)
Any ideas or clues?
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion