Results 1 to 6 of 6
Threaded View
-
01-10-2017, 06:15 AM #6
- Join Date
- Jun 2016
- Location
- Oklahoma
- Posts
- 904
Check the first layer height. PETG doesn't like being squished (70 on the bed). I print larger items in PTEG on PEI with a bit of glue stick and it releases pretty good. I also use a "sticker scraper" single edged razor blade in holder to release prints. Works well but be careful.
Qidi X Plus 3 Paper thin first...
05-27-2024, 01:15 AM in General 3D Printing Discussion