Results 1 to 6 of 6
Threaded View
-
01-09-2017, 03:00 PM #5
Yeah easiest way to get a print off a bed is to cool it right down. Spraying compressed air onto the base of the print will have a cooling affect and should work perfectly.
Be careful as if you cool a glass bed too much it can crack.
I find pushing a sharpe knife between the print and the bed whilst cooling the print also helps.
Regards,
www.3dexfilament.co.uk
New member with print issue
06-11-2024, 08:57 AM in Tips, Tricks and Tech Help