Results 1 to 8 of 8
-
12-28-2016, 03:06 PM #1
- Join Date
- Dec 2016
- Posts
- 4
New to 3D print, need advise on chossing the printer
Hi all,
this christmas i had recived as a gift a CTC 3D printer for 220€ on amazon.es, but it came with issues, lack of one end stopper, glass broken, a bearing broken, and overall quality really cheap and poor (flimsy wood, etc...).
So im looking for something a bit better, under 400€.
By now the option that makes more confidence to me is the Wanghao duplicator i3 (375-390€ @ amazon.es), but im completley open to any sugestion, as im doing a crash course to 3D printers im a bit crazy.
Of course, I look at the Davinci, but i prefer something i can rework and upgrade by myself and learn with it, not just a plug an play.
Thanks for your time ppl
-
12-28-2016, 09:54 PM #2
- Join Date
- Dec 2016
- Posts
- 43
I picked a Makerfarm http://www.makerfarm.com/
I work for a school and we got (3) 10" models, I just ordered and built a 12" for my personal use. Its was a little more then your asking for. but if your looking for a solid kit with expansion the I'd give this a look. I'm in IT and prefer to build my computers from scratch rather then lease or buy the Dell / HP/ Apple, that's what attracted me. Build + Learn = Grow
Good luck
-
12-29-2016, 05:47 AM #3
- Join Date
- Jun 2016
- Location
- Oklahoma
- Posts
- 902
QIDI X-one might be an option.
-
12-29-2016, 06:31 AM #4
- Join Date
- Dec 2016
- Posts
- 4
The only quidi X-one i find is this
https://www.amazon.es/gp/offer-listi...3014392&sr=8-1
its more expensive, and also comes from chine so, it can take so long to arrive!
PS: I live in spain, so i look at amazon.es and other eur supliers.
Thanks for your responses.
-
12-31-2016, 02:18 AM #5
You can get the printer from this websit www.reprapmall.com
it is from china!
but for Spain, it is free shipping and shipping to your country just need 3-7 days
also you can do many change on the printer, for example upgrading dual Z axis, upgrading dual extruder, upgrading large heat bed and so on
-
12-31-2016, 06:59 AM #6
- Join Date
- Dec 2016
- Posts
- 4
-
12-31-2016, 08:32 AM #7
- Join Date
- Dec 2016
- Posts
- 4
Thanks for your response wendy, i had take a look at the page and they had low prices, but i didnt find any indeep review of HE3D printer "non delta" version.
they are good printers, is the shop trusty?
-
01-01-2017, 09:06 PM #8
Yes it is trusty! and its technique supporting is also great!
Printing time- Is this right?
09-13-2024, 07:51 AM in General 3D Printing Discussion