Quote Originally Posted by JIPSTERR View Post
zsteps/mm was set to 398. Once I manually spun the dial all the way to 2560 it worked. Went all the way up like and traveled at the correct speed.
OK, great. Unfortunately I'd want to question what else may be *wrong* in that hex file you flashed, but maybe that's just me.

Hopefully someone else can work you through the bed leveling aspect. If I'm not mistaken, you need to run the G29 bed leveling command before you attempt to do a home. I also believe there's a z offset you can set in firmware that can allow you to get by not always running a G29 first. Until then, you might be stuck always having to do a G29 before a G28 or autohome from the LCD or Cura. But again let me emphasize - I have zero bed leveling expertise.