Results 1 to 7 of 7
Thread: Both Extruders Now Malfunctioned
Threaded View
-
12-22-2016, 06:09 AM #3
- Join Date
- Jun 2016
- Location
- Oklahoma
- Posts
- 904
That "fluffy" look is familiar. I had something similar when the filament got stuck on the spool. Another time the filament actually broke off in the feed tube. My guess is that if you don't have an obvious clog then you are running dry on filament for some reason.
Holes and pockmarks in print walls
06-04-2024, 09:14 AM in General 3D Printing Discussion